HOW TO PAIR MY SIT MEANS SIT REMOTE TRANSMITTER WITH A SINGLE COLLAR
Matching the Collar Receiver to the Transmitter on Your SD-425
If you are pairing multiple collars to a remote transmitter, visit our article HOW TO ADD ANOTHER DOG’S COLLAR RECEIVER TO MY SIT MEANS SIT TRAINER.
Ensure the collar receiver is off by confirming there are no lights after 10 seconds. To power the collar receiver off, press the power button until you see the red light and release.
Press and hold the power button on the collar receiver. The indicator light will turn green. Continue to hold until the light goes back out, then release the power button.
Press and hold the upper button with the bump on the remote transmitter until you see the collar indicator light flash green 5 times. Your remote transmitter and collar are now paired.
Test pairing.
- Turn the intensity dial to V/T.
- Press the upper button with the bump. The collar should vibrate or tone depending on the set mode.
If you do not hear a tone or feel a vibration, repeat the pairing process.
CONTACT CUSTOMER CARE
If you need further assistance, please contact our customer care team.