HOW TO SET THE TONE ON MY SPORTDOG® UPLANDHUNTER® 1875 BEEPER USING THE REMOTE
The remote and beeper must be matched to change the tone settings remotely. For pairing information, visit HOW TO PAIR MY SPORTDOG® UPLANDHUNTER® REMOTE WITH A SINGLE COLLAR OR BEEPER or HOW TO ADD ANOTHER SPORTDOG® COLLAR OR BEEPER TO MY SPORTDOG® UPLANDHUNTER® 1875.
It is recommended to change tones outdoors with the speaker pointed away from self as the beeper is extremely loud.
CHANGE THE TONE
Make sure the beeper is on, and the Remote’s toggle switch is up, and the dial is set to 7.
Press the mode button on the back of the remote using a pen or something small, and release when the LED on the front of the remote lights up green.
Press the button on the remote that corresponds with the beeper you are changing tones. The beeper will start cycling through the tones by playing them one at a time.
Once you have heard the tone you want, press the same remote button again.
The beeper will emit 3 beeps to confirm that you selected a tone.
If you have multiple beepers, follow the same steps from above. Make sure to use the remote button that corresponds with the beeper you are changing tones.
Turn the dial one position to turn off the remote’s Indicator Light and resume normal operation.